Core Question: What Does the “Standard” Field in an English Test Report Usually Mean?

In an English test report or compliance document, the Standard field is typically used to indicate the testing standard or regulatory requirement on which the report is based. This field may display a specific standard number (e.g., IEC 62368-1, EN 71-1, ASTM F963) or an abbreviation of a regulation name (e.g., RoHS, REACH). Understanding the meaning of this field helps determine whether the report covers the applicable requirements of the target market and is a key step in document verification during platform review.

Applicable Scenarios and Common Locations

The Standard field is commonly found on the cover page of a test report, the test results summary table, or the “Standard/Regulation” section of a certificate. Examples include:

  • Electronic and electrical products: may indicate IEC 62368-1, EN 60598, or a UL standard number;
  • Toy products: may display EN 71 series, ASTM F963, or GB 6675;
  • Chemical testing: may show RoHS (EU) 2015/863, REACH (EC) No. 1907/2006, etc.

When submitting CPC document or DoC documents for platform review (e.g., Amazon, TEMU, Walmart), the reviewer typically checks whether the Standard field matches the product category and regulatory requirements.

Common Misunderstandings and Clarifications

Some users mistakenly interpret the Standard field as:

  • A certification mark or certificate number: The Standard field is only a standard reference and does not represent the certification body or registration number.
  • Product model: Standard is unrelated to the product model; the two are usually in separate fields in the report.
  • The sole proof of validity: Even if the Standard field is correct, whether the report will be accepted by the platform depends on factors such as the issuing body, completeness of test items, and product changes.

Therefore, when reviewing a report, do not make a final decision based solely on the Standard field; assess it together with the report date, test items, applicable regulation version, etc.

Document Preparation and Verification Suggestions

To ensure the submitted documents match the requirements, it is recommended to prepare the following:

  • Full test report (PDF format, including cover page, test results, appendices);
  • Product manual or specification sheet (to confirm product category and standard applicability);
  • Declaration of compliance document (e.g., DoC, CPC document, corresponding to the standard in the Standard field);
  • Other supplementary documents required by the platform (e.g., FCC authorization records, SDS, etc.).

Before submission, verify that the Standard field meets the following conditions simultaneously:

  • Covers the applicable regulation or standard for the main product category;
  • The standard version is consistent with the production date of the tested sample (if applicable);
  • The standard listed in the report is still in effect (subject to regulatory revisions);
  • If the platform requires a specific standard (e.g., CPSC or applicable product safety authorities or market surveillance authorities mandatory toy standards), confirm that the Standard field includes the full name or number of that standard.

Considerations in Platform Review Scenarios

When submitting documents to platforms such as Amazon, SHEIN, or Temu, reviewers may directly use the Standard field to filter report validity. For example:

  • If the Standard field shows a non-target market standard (e.g., only GB instead of EN/ASTM), it may be deemed inapplicable;
  • If the standard number is missing or unclear (e.g., only written as “General Requirements”), it may cause a review delay or require supplementary explanation.

Before submission, it is recommended to cross-check the compliance requirements published by the platform (e.g., Amazon’s CPC document requirements, Temu’s compliance document guide) to confirm whether the standards listed in the Standard field are explicitly accepted by the platform. The platform retains final review authority; this article is solely for document preparation reference.

Risk Boundary

The content of this article is only for interpretation of report field meaning and document preparation, and does not constitute a guarantee of platform review results. Actual review results are subject to platform rules, product information, and submitted content. If there is a discrepancy between the Standard field and expected requirements, it is recommended to consult a testing agency or professional compliance advisor for targeted adjustments.

Next Step: Document Review

If you need further confirmation on whether the Standard field in your report is suitable for the target platform, feel free to contact us for a quick report review. We will provide a checklist and supplementary suggestions based on your product category, target market, and platform requirements.